回到顶部
×
Products
Contact us
The Difference Between Vertical Ring Die Pellet Machine And Flat Die Pellet Machine
Published:2015/07/31 Read: 740 times

Hello dear friends,Nice day!welcome to scan our website :   (www.tcpelletmill.com )

Jinan Taichang Transmission Machinery Co.,Ltd will introduce different type machine for you!and you can choose as you like.Ok, Let's begin!


Vertical ring de pellet machine introduction:

1.Vertical feeding,material can ba directly feed into pelletizing room.

2.The die static and roller rotate,Because of centrifugal force,material are evenly distributed around pelletizing room .

3.Double layer die,can reduce the cost ,high efficiency and save energy

4.Ring die and vertical structure are good for cooling the pelletizing room.

5.Independent abd frequency conversion discharge device can ensure the rate of pellet formation.

6.Unique automatic lubrication system,which lubricate the bearing,die,rollers,it can ensure the machine working more than 20 hours without stopping.

The vertical ring die pellet machine main used for making biomass wood pellets,the pellers can as fuel.the raw material can use rice husk ,sawdust,wood shavings,corn starw and so on.and TCZL series pellet machine can produce 4-14mm pellets for you and the pellets diameter can be adjusted as your demand.

Flat die pellet machine introduction:

1.The die rotate and roller also rotate by the die rotate force

2.The feed pellets are high density,smooth and clean surface.

3.Formation rate can reach more than 90%,low investment

4.Automatic lubrication system can ensure the machine continuous work and high efficiency

5.Widely used in home and farm and popular with small scale business dealer

The flat die pellet machine main used for making animal feed pellets,such as chicken,duck,rabbit,cow,goat,cattle etc.,the machine can produce different diameter pellets for you according to your demand,2-8mm is ok.

But as for poultry animals,such as chicken,duck ,2-4mm is suitable pellets size.and as for livestock animals,such as cow and goat,4-8mm is suitable size.

By the way before making pellets,your raw material had better is powder and the best suitable moisture to make pellets is 15-20%.and the raw material you can use soybean,corn,cake,corn straw powder etc.

If you want to know more about the machine,please contact us at any time.Have a nice time!

Please kindly check our website:www.tcpelletmill.com