回到顶部
×
Products
Contact us
Does the straw need crush before producing straw pellets?
Published:2016/06/27 Read: 1088 times


Answer:Yes,it is.


The straw pellet machine must be match with straw crush machine( straw  hammer mill  )when they using.
Please attention,if produce straw pellets,there have some points:
The raw material size had better less than 2/3 of the mould's hole
The best moisture to produce pellets is 15-20%.
After using crush machine,and the finished products size about 6-8mm,it is powder shape,it can produce pellets directly.

Most importantly,the straw moisture must be dry,if fresh straw it can not be crushed.and the best moisture to crushing is 30%.If the moisture too wet,we suggest clients choose rotary dryer first and drying the moisture and then crushing it.
Our straw crush machine voltage are 380v,50hz,3 phase.we can produce diesel engine also.If your voltage different with China,we can customize the motor as your requirements.

A complete crush machine and pellet machine,we have many models and types,different model ,different types,they have different parameter.
And the price also different,lower price about 800USD,And the capacity from 100kg/h to 10t/h .

Different model,we can do it.
Last but not least,the capacity of straw pellets connect with the machine model ,the raw material ,the operational circumstances.  

Detailed operation ,please consult factory after purchased the machine.


More information,please leave us message.thanks.